Manganese addition
Adds manganese to the melt in steelmaking and casting practice.
Steel & Casting Materials
Primary market — Steel & Casting Materials
Ferro manganese supplied to plant practice
A manganese ferroalloy supplied to steel and casting customers for alloying and deoxidation duty. Grades, sizing and technical specifications are available on request.
FerroalloyLump and sizedGrades on requestBulk supply
Product overview
Manganese into the melt, sized so the recovery is repeatable.
Ferro manganese is used to add manganese to steel and iron melts and to support deoxidation practice. NPE supplies it in the grade and size band agreed with the customer.
Grades and exact technical specifications are available on request. The requirement is confirmed before the first order and applied as the release basis for every consignment.
Packing and shipping formats are selected for plant handling and the transit route, with documentation prepared for the destination market.
Product information
Ferroalloy — Product grades, technical specifications and supporting documentation are available on request.
- Product grades
- On request
- Chemistry
- On request
- Particle size / sizing
- On request
- Density
- On request
- Moisture
- On request
- Packing
- On request
Key benefits
What ferro manganese change in your system
Each point below is a reason the material is specified. Values are not published; grades and technical specifications are available on request.
Deoxidation support
Used in melt practice where oxygen control forms part of the addition sequence.
Screened sizing
Sized fractions matched to ladle and furnace practice.
Consistent chemistry
Released against the grade agreed with the customer, lot by lot.
Volume supply
Bagged and bulk formats according to order volume.
Established supply
Manufacturing since 2005 and exporting since 2006, with customers in more than 100 countries.
Product grades & technical specifications
Available on request
Product grades are available on request. Technical specifications are available on request and are agreed per customer before the first order, becoming the release criteria for every batch that follows.
Product grades
Available on request
Grades supplied to customer requirement
Technical specifications
Available on request
Agreed before first order
Chemical composition
Available on request
Reported per consignment
Particle size / sizing
Available on request
Set with the customer
Packing specification
Available on request
Selected for destination and route
Documentation
Available on request
TDS, SDS/MSDS, COA and brochures
On request
Product grades, technical specifications and supporting documentation are available on request.
Applications
Where the material earns its place
Duties the material is supplied into, with grade selection confirmed with our technical team before the first order.
01
Steelmaking
Manganese alloying additions in carbon and alloy steel practice.
02
Foundry
Melt-shop additions in iron and steel casting.
03
Welding consumables
Used where the formulation specifies a manganese alloy input.
Industries served
Sectors specifying ferro manganese
Supplied into technical supply chains where the material is qualified before it is purchased.
Steel
Integrated mills, EAF and induction plants.
Foundry
Iron and steel casting operations.
Welding
Electrode and flux manufacturing.
Distribution
Metallurgical stockists and traders.
Why choose NPE
A supply relationship built on documentation, not assurances
Manufacturing since 2005, exporting since 2006, with supply experience across more than one hundred countries.
Two manufacturing sites
Manufacturing in West Bengal and Maharashtra, India, with a current annual capacity of 4,000 MT and a single quality standard across both sites.
Oil-well application focus
Materials engineered and supplied for demanding oil-well applications, with grades set to customer requirements.
Specification-led supply
Requirements are agreed before the first order and become the basis on which each subsequent consignment is released.
Export experience since 2006
Around 95% of output is exported, with supply experience across more than 100 countries and documentation prepared for the destination market.
Resources
Resources available on request
Technical documentation including TDS, SDS/MSDS, COA, Product Brochures and Packaging Specifications are available upon request.
Standard documentation
- Technical Data Sheet (TDS)
- Safety Data Sheet (SDS/MSDS)
- Certificate of Analysis (COA)
- Product Brochure
- Packaging Specification
Grade-specific on request
- Product grades
- Technical specifications
- Certificate of analysis for the dispatched lot
- Safety data sheet in destination-market format
- Packaging specification for the agreed route
- Representative sample for evaluation
Contact
Discuss a ferro manganese specification
Describe the oil-well or industrial application and the requirement the material has to meet. Product grades, technical specifications and documentation are issued on request, usually within one working day.
info@nationalpowerengineers.com+91 9883622110